Method / Step
Very first, there has to be a router within the network. Then you definitely must establish the right network configuration:
The default IP address from the router is 192.168.1.1, along with the default subnet mask is 255.255.255.0, (these values can be changed as required), after which configure the IP address from the computer along with the IP address with the hard disk recorder. As long as it is on the identical network segment because the router. on
The setting on the IP address of your DVR here depends on the DVR brand, and the network setting interface will likely be slightly diverse, but so long as the address configuration is right.
Then start to configure the router, and use the built-in DHCP server to automatically set the IP address
1) Set the computer's TCP / IP protocol to 'obtain IP address automatically'.
two) Power off the router and laptop or computer. Turn on the router very first, then turn around the laptop, in order that the router's built-in DHCP server will automatically set the IP address for the laptop.
three) Fill in the address on the challenging disk video recorder 192.168.1.108 (here, for instance 108). So long as it is actually connected towards the router, soon after installing the software program around the client Computer, it could be accessed around the LAN. Create the address 192.168.1.108 within the LAN
Then username, password. When you are completed, click Connect.
Another important point is definitely the remote access from the wide location network, which can be what we normally refer to as external network access.
Enter the IP address in the router within the address bar of the browser. After the connection is established, log in with the username and password.
Soon after http://download.cnet.com , set the IP address subnet mask in the network parameter LAN, the login account password with the WAN port, then connect.
Set hard disk photo recovery software of the tough disk recorder to the internal network address of your router, and set the IP address for the similar network segment because the gateway.
Then inside the forwarding rules-virtual service port mapping.
Peanut shell applies to get a domain name, performs domain name resolution, and makes use of the domain name indicated in the domain name info to access.
Then in the same place where the client software program enters the IP address, just create the peanut shell domain name.
Fill inside the username and password to access.
Today, the difficult disk video recorders which are more branded have APP applications, which is often remotely monitored on your mobile phone or lithography.
The default IP address from the router is 192.168.1.1, along with the default subnet mask is 255.255.255.0, (these values can be changed as required), after which configure the IP address from the computer along with the IP address with the hard disk recorder. As long as it is on the identical network segment because the router. on
The setting on the IP address of your DVR here depends on the DVR brand, and the network setting interface will likely be slightly diverse, but so long as the address configuration is right.
Then start to configure the router, and use the built-in DHCP server to automatically set the IP address
1) Set the computer's TCP / IP protocol to 'obtain IP address automatically'.
two) Power off the router and laptop or computer. Turn on the router very first, then turn around the laptop, in order that the router's built-in DHCP server will automatically set the IP address for the laptop.
three) Fill in the address on the challenging disk video recorder 192.168.1.108 (here, for instance 108). So long as it is actually connected towards the router, soon after installing the software program around the client Computer, it could be accessed around the LAN. Create the address 192.168.1.108 within the LAN
Then username, password. When you are completed, click Connect.
Another important point is definitely the remote access from the wide location network, which can be what we normally refer to as external network access.
Enter the IP address in the router within the address bar of the browser. After the connection is established, log in with the username and password.
Soon after http://download.cnet.com , set the IP address subnet mask in the network parameter LAN, the login account password with the WAN port, then connect.
Set hard disk photo recovery software of the tough disk recorder to the internal network address of your router, and set the IP address for the similar network segment because the gateway.
Then inside the forwarding rules-virtual service port mapping.
Peanut shell applies to get a domain name, performs domain name resolution, and makes use of the domain name indicated in the domain name info to access.
Then in the same place where the client software program enters the IP address, just create the peanut shell domain name.
Fill inside the username and password to access.
Today, the difficult disk video recorders which are more branded have APP applications, which is often remotely monitored on your mobile phone or lithography.
